Food Package/Gas Packing vacuum leak tester ASTM D3078

ab use offline Plastic Bottle Leak Tester is composed of the mainframe and the vacuum chamber. 

A test sample is placed into a vacuum chamber with water and the air above water level is evacuated by a venturi vacuum ejector. A pressure difference is created inside and outside the sample and leakage can be observed and identified when the sample is inflated and streams of bubbles appear. 

Lab use offline Plastic Bottle Leak Tester uses vacuum ejector to generate stable vacuum environment.

1. The leak test requires no electricity 

2. High leak test efficiency

3. Strong cast vacuum chamber

4. Different chamber sizes available

5. No calibration needed

6. No vacuum pump required

7. Easy installation, start-up and operation 

8. Low maintenance

Negative pressure leak tester technical specification

Vacuum0~-90KPa/0~-13PSIVacuum chamber size

Φ270 mm x 210 mm (H) (Customization available)Gas source

Compressed air

Gas Pressure0.7MPa/101.5PSI

Standards

ASTM D3078 , GB/T 15171