Chongqing Advanced Technology Company Limited
Hunan Province, US
@chongqing-advanced-technology-company-limited
Quick actions
SKU VS3YG-61241
IEC61241 The Minimum Ignition Temperature Test Apparatus for Electrical Products
The Minimum Ignition Temperature Test Apparatus
Other Business Services
Price on request
No public price on this one — ask the supplier for a quote.
Details
Standard: IEC 61241-2-1:1994:Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures ofdust EN 50281-2-1:1999:Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust Technical parameters: 1 Furnace operating temperature range Room temperature ~ 800 ºC. The operating temperature can rise to 1000 ºC to clean the test chamber 2 emperature accuracy ± 1% (higher than 500 ºC), ± 3% (lower than 300 ºC). 3 The pressure of the dispersion air chamber 0 ~ 1 bar 4 The pressure accuracy of the air storage device ± 5% 5 Size 500X300X450 mm 6 Power supply 230v / 50Hz or 110v / 60Hz Testing process The Test is carried on the in Godbert-Greenwald furnace. The heating furnace is consist of the vertical quartz tubes . The hole is at the bottom of the tube.The glass observing room is connected with sample fixing device at the top of the quartz tubes. The compressed air from the tank blows the dust into the heating furnace and the sample fixing device ,and then exposed into the glass observing room and the quartz tubes .the heating furnace is located on the holder . And you can observe the ignition appearance from the bottom of the furnace. The test begins from the 500ºC. If you observe the ignition appearance ,you shall decrease the temperature at the 10ºC,until the ignition does not appear. Results description When the ignition occurs , the lowest temperature is recorded as the minimum ignition temperature of the dust cloud . The minimum ignition temperature of the test data information is used to determine whether the surface temperature of the equipment can cause the automatic fire of the exposed dust . It is an important standard to evaluate the selection of the equipment at the condition of the dusty environment . When using the minimum ignition temperature testing data ,you shall leave a safety limit for the small-scale test .