FRP cable duct rodder DN4.5mm to 16mm

FRP duct rodder cable rodder snake duct rodder Guid : 1, Unlock the duct rodder hand brake and check that the drawing head in tight . Pull the fiberglass rod from the grame through the guide roller . 2,Feed the rod manually into the duct through to the far end of the duct . Use the brake handle as required to prevent rotation of the cage . 3,Insert cable into pull-grip accessory which connect with the drawing head on duct rodder . Attach the end of the rod to the utility being installed and pull back manually . The rod will recoil inself back into the cage . Safety 1,As the fiberglass rod have a high strength ,please never bend the fiberglass rod around a corner with a radius less than the Minimum Bend Radius . 2,A large amount of energy is stored in the coiled fiberglass rod . Always maintain control over the free end of the rod when the bake is not applied . 3,Be prepared for the unexpected . Use recognized safety practices and wear recognized safety equipment . www.constructionfrp.com whatsapp/tel:0086-15176895887