Belt conveyor

The belt conveyor has the characteristics of simple structure, easy maintenance, small energy consumption and low cost. 1, various types of materials can be delivery, can transport a variety of bulk material, also can transport all kinds of cartons, bags and other sheet lighter weight products, goods delivery, you can also be used for large supermarket cashier widely used. 2, belt conveyer structure forms, slotted type belt, flat belt machine, climbing belt machines, roll belt conveyor, belt conveyor, and other forms of turning, conveyor belt can also add push plate, side panel, skirt edge and other accessories, can meet various technological requirements. 3. Belt conveyor adopts special food grade conveyor belt, which can meet the requirements of food, pharmaceutical and daily chemical industry. 4. Smooth delivery, no relative motion between material and conveyor belt, can avoid damage to the conveyor. 5. Compared with other conveyor, noise is relatively small, which is suitable for a quieter situation in the working environment. Fault handling method There are many reasons for running deviation, which should be handled according to different reasons. First one: adjust the load supporting roller group Second: install the tuning roller group The adjustment of the tension of the belt tension is a very important part of the adjustment of belt conveyor. Fourth: adjusting the driving drum and adjusting drum position is an important part of the adjustment of leather belt running Fifth: two-way running of belt conveyor deviation adjustment ※ the handling of belt slippage: The first: screw tensioning or hydraulic tensioning belt of the belt machine can adjust the tensioning to increase tension when the sliding of the spiral tension or the hydraulic tensioning leather belt conveyor appears.However, sometimes the tensioning process is not enough, and the belt is permanently deformed, and then the belt can be cut off to be revulcanized. Second: using nylon tape or EP is a long, tight schedule, which can be resulfurated or tightened up when the trip is not enough. Third: the belt of the belt conveyor belt will be added to the belt when the belt is slipping and the belt will be added to the belt.But too much should not be added to prevent the belt from taking unnecessary excessive tension to reduce the life of the belt.