H 1.1m Automatic Rising Bollards 110 KG 4S Rise Road Safety Bollards

PRODUCT DESCRIPTION Automatic hydraulic road bollards with Electronic remote control Installation steps 1. Cut the ground surface and excavate,the foundation base need around 800mm and 1130mm. 2. Fill the bottom with 20-30mm pebble and sand as water seepage stratum. 3. Embed the bollard,make sure the head of the bottom is at the same level with the horizontal ground. 4. Install the wiring tube and drainage pipe.Make sure each wire should be secured by waterproof tape to avoid water vapor permeated into the wire. 5. Power on to test. Make sure the bollards can work well.Then cover the head of the bollard to avoid the concrete dirty it.All the drainage pipe hole need to be covered by structural adhesive. 6. Pour the concrete into the foundation base.Be careful to avoid the movement of bollard. 7. Tidy up the bollard head and ground surface, complete installation containers and bottles in all shapes. Brand Name Gaolei Product Type stainless steel hydraulic rising bollards Material 304 stainless steel Weight Approx 110KG/pcs Moving body Height 600mm (customized) Moving body Diameter 219mm (OEM: 133mm,168mm, 219mm, 273mm etc.) Total Height 1100mm (customized) Steel Thickness 6mm±0.3 (customized ) Engine Power 370W Movement Mechanism Integrated electric-hydraulic drive Unit Operating Voltage Supply voltage: 220V (control voltage 24V) Operating Temperature -45℃ to +75℃ Dustproof and waterproof level IP68 Optional Function Traffic Lamp, Solar light, Hand Pump, Safety Photocell, Reflective warning tape/sticker Installation Distance Bollard center spacing 1.2-1.5m Running time 2-6S ( adjustable). Control mode Remote control ( 50m - 20m) /button line control/license plate recognition/Bluetooth sensor/mobile APP remote control (optional). Power failure emergency Reserve battery Collision resistance 1108KJ ( Car speed 65km/h) External equipment Traffic lights/voice prompts to pass (optional) H 1.1m Automatic Rising Bollards 110 KG 4S Rise Road Safety Bollards 0