Three layer corrugated paperboard production line

※ZJ-F shaftless mill roll stand ※Structural features: ★Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc. ★each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car; paper guide the use of channel 14 and the guide post weld, paper car adopt 10mmwelded stell, the length of track is 4500mm. ★ manual dics brake, add screw following ★electric elements centralized control the electric elements,expand chuck. ※technical parameters: 1, Backstands action mode: mechanical electric operation 2, the range of paper jams: maximum: 1800mm minimum: 600mm 3, the diameter of paper jams: maximum: ¢ 1400mm minimum: ¢ 400mm 4, Unilateral maximum load: maximum2000Kg 5, Powered motor parameters: 1Paper jams motor550W×4set 380V 50HZ short(S2)working standard 2lift motor 1.5Kw 380V 50HZ short(S2)working standard ※paper trolley, track ※Structural features: ★ push the roller in place. ★ track whole buried, The main frame of the 14th channel with ¢ 20mm cold drawn round welding, the track length 4500mm. ★Each paper with two stage paper trolley, and the paper from the two sides at the same time. ※RG-1-600 top(core)paper preheater ※Structural features: ★ In accordance with national standard category pressure vessel, and with the pressure vessel certificate. ★The roll surface after precision grinding, fine grinding and hard chromium plating processing, surface friction, durable. ★electric adjustable angle, angle can rotate in the range of 360°, and adjust the paper preheat area. ※technical parameters: 1, diameter of the preheat roller: ¢ 600mm Diameter of the angle: ¢85mm×2 2, work power: 380V 50Hz 3, motor power: 250W short (S2) work system ※SF-280S fingerless type single facer ※Structural features: ★Adopt vacuum suction structure, with high pressure strong blower.Suction with silencer.Gas supply and electrical control cabinet to focus on the same operation cabinet, not less than 1.5 meters away from the host, Fully enclosed full operation side. ★base and wallboard cast iron wall, Wallboard thickness130mm. Universal Joints. ★ corrugated roller material adopt 48CrMoalloy steel,quenched,Laser hardening,Surface finish,main roll of corrugated diameter¢ 280mm, surface hardnessHRC60degree above. The key parts of the tile and pressure roller bearings Wafangdian produce high temperature bearings. ★ pressure roller ¢ 284mm, surface grinding and chrome-plated; cylinder control and remove up and down, 45 carbon steel materials, quenching (with cushioning devices). ★pneumatic control glue to glue back, glue roller diameter ¢215mm,Engraved polished surface after a 36-line pit style textured machined chrome plated,after scraping the roller surface polished hard chrome plated. ★Corrugated roller, pressure roller materials provided by the Central Plains Steel, High on corrugating unilateral 0.15mm, 0.075mm high pressure roller unilateral. Plus stopper. ¢ 160mm cylinder with compression cylinder. ★ preheat roll adopt seamless steel pipe production by tiangang ¢ 300mm, connecting with metal Hose. ※regular technical parameters: 1, effective width: 1800mm 2, operation direction: left or right (determined in accordance with customer plant) 3, design speed: 100m / min 4, temperature range: 200-260 ° C 5, corrugated flute: (UV type or UVV type) ※roller diameters parameters: 1, diameter of corrugated roller: ¢ 280mm 2, diameter of pressure roller: ¢ 284mm 3, diameter of glue roller: ¢ 216mm 4, diameter of preheat roller: ¢ 320mm ※powered motor parameters: 1. main drive motor: 7.5Kw rated voltage: 380V 50Hz Continuous (S1) working standard 2, suction motor: 7.5Kw rated voltage: 380V 50Hz Continuous (S1) working standard ※DF conveyor bridge ※structural features: ★This part is the main beam of the 20th channel, 16-beam, angle iron 63, column, etc. are connected. ★Both of the security fence, ladder , high-strength save people the word pedals, ensure the safety of personnel and easy to operate. ★Pull the paper shaft surface tension axis, feeding shaft by grinding hard chrome plated. ★Vacuum tension control, 5-inch suction tube, plus regulating valves, air flow can be infinitely adjustable. ★Dual front bezel correction guide column positioning, screw driver, fast and accurate positioning, walking steadily. ※roller diameters parameters: 1, Paper roll and a tension roller diameter: ¢130mm diameter of conveyor roller: ¢110mm 2, Active tension roller diameter: ¢85mm diameter of over paper rollers and guide rollers: ¢110mm 3, Paper towing shaft diameter: ¢ 110mm ※Motor and electrical parameters: Corrugated single paper lift motor: 3Kw 380V 50Hz continuous(S1)work system 2, The bridge adsorption motor: 3Kw 380V 50Hz continuous (S1) work system 3, Wide motor tune cardboard: 250W 380V 50Hz short (S2) work system