6214 Deep Groove Ball Bearing 70*125*24mm SUNBEARING

6214 Deep Groove Ball Bearing 70*125*24mm SUNBEARING Product Specification Bore diameter: 70 mm Basic dynamic load rating 63.7kN Outside diameter: 125 mm Basic static load rating 45kN Overall width: 24 mm Fatigue load limit 1.9kN Rows of Balls Single Reference speed 11000r/min Outer ring type: Unsplit Limiting speed 7000r/min Radial clearance class CN (Standard) Mass 1.09kg Closure type: ZZ r1,2 min.1.5mm Material Chrome Steel da min.79mm Cage Material Sheet Steel Da max.116mm Calculation factor 14,4 ra max.1.5mm 6214 Bearing Short Description 6214 deep groove ball bearings are one of the most common styles of ball bearings which support axial forces in both directions as well as radial forces. Radial ball bearings are composed of an inner ring and an outer ring, plus a cage with a precision ball set. Ball-bearing is one of the most common and used. It can support thrust and radial loads. Its speed of rotation is superior to other types of bearings. Bearings facilitate the movement between a shaft and the parts attached to it. There is a lot of types depending on different aspects such as loads, accuracy, rolling elements, or speed. Why Choose 6214 Bearing? This type of ball bearing is often the most popular because of its versatility. They are ideal for high speeds and can handle a good radial load capacity, all will very little maintenance required. “Deep Groove” refers to the race (the groove where the balls rest). There is therefore a larger space between the inner and outer rings, than the diameter of the ball. This leaves space for the rubber seals. Why choose a steel ball bearing? Steel is the perfect material for ball bearings as it provides strength and reliability whilst being corrosion-resistant. Steel ball bearings are suitable for installing as they require very little maintenance and are designed to last.