6318 Open Radial Ball Bearing 110*200*38mm Single Row SUNBEARING

6318 Open Radial Ball Bearing 110*200*38mm Single Row SUNBEARING Bore diameter: 90 mm Limiting speed 4900 1/min Outside diameter: 190 mm Reference speed 5100 1/min Overall width: 43 mm Calculation factor (f0) 13,9 Rows of Balls Single Bore C - Cylindrical Bore Outer ring type: Unsplit Cage Type S - Steel or Standard Cage Internal clearance: CN(Standard) Heat Stabilization No Heat Stabilization - Temperatures up to 120°C Closure type: Open Weight: 5.43kgs Basic dynamic load rating, radial 142000 N da min 104 mm Basic static load rating, radial 102000 N Da max 176 mm Fatigue limit load, radial 5900 N ra max 2,5 mm 6318 Bearing Short Description The 6318/C3VL0241 is an electrically insulated deep groove ball bearing (INSOCOAT ball bearing). A special coating on the outer ring (VL0241) protects against bearing damage and eventual failure due to the passage of electric current. The 6318/C3VL0241 has an inner dimension or bore (d) of 90mm, an outer dimension (D) of 190mm, and a width or thickness (B) of 43mm. The 6318/C3VL0241 is open on both sides (it has no seals), has a brass cage, and an internal play greater than Normal. 6318 Ball Bearing Suffix VL0241: External surfaces of the outer ring coated with aluminum oxide. The coating is sealed with a resin to protect against the conductive effects of water and moisture. This basic coating can withstand voltages up to 1.000 V DC. C3: Internal clearance greater than Normal. The extra internal clearance allows expansion due to high speeds or temperatures. 6318 Bearing Application Open deep groove ball bearings are suitable for high-speed or even extremely high-speed operation, and are very durable and do not require frequent maintenance. This type of bearing has a low friction coefficient, high limit speed, and various size ranges and forms. It is used in precision instruments, low-noise motors, automobiles, motorcycles, and general machinery industries. It is the most widely used type of bearing in the machinery industry. Mainly bear radial load, but also can bear a certain amount of axial load.