UCP206 2 Bolts Metric Pillow Block Bearing 30mm Cast Iron SUNBEARING

UCP206 2 Bolts Metric Pillow Block Bearing 30mm Cast Iron SUNBEARING Product Name Pillow Block Bearing UCP206 Structure Pillow block Bearing Limiting speedBearingwith shaft tolerance h6 5000r/min Bore Size 30 mm Housing material Cast iron L 165mm Set screw M6x0.75 H2 83 mm Hexagonal key size for set screw 3mm Designation, housing P206 Recommended tightening torque for set screw 4N·m The Designation, Radial Insert Ball Bearing UC206 Recommended diameter for attachment bolts, mm 16mm Bearing Type Extended inner race with set screws Rotational Speed [Max] 4900 RPM A 45 mm Operating Temperature Range -40 to 250 ºF -40 to 120 ºC Product weight: 1,29kg Lubrication Non-Relubricatable Material Cast iron housing, chrome steel bearing Mounting Hole Center-to-Center (e) 48 mm Dynamic Load Rating (Cr) 19.5kN Mounting Slot Length (S2) 21 mm Static Load Rating (Cor) 11.2kN Mounting Slot Width (S1) 17 mm Fatigue load limit 0.475kN Housing Base Thickness (g) 15mm UCP206 Bearing Features UCP206 30mm Pillow Block Bearing The UCP206 bearing is dimensionally interchangeable with other brands bearing such as Asahi / FYH and NTN. The new radial insert ball bearing and housing units give easy mounting, smooth running and high reliability and thus allow particularly economical bearing arrangements. The dimensions of the UCP housings, made from flake graphite cast iron and with a primer paint coating, conform to JIS B 1559 (Japanese Industrial Standard Dimensions). These single piece cast housings can support moderate to high radial and axial loads. The radial insert ball bearings have basic protection against corrosion due to the Durotect BS coating. The bearing units are particularly suitable for applications with moderate to high loads. How to Maintain Pillow Block Bearing In order to distinguish whether the removed bearing can be used from the beginning, the standard accuracy, rotation accuracy, internal clearance and wear of the cooperation surface, raceway surface, retainer and seal ring should be checked. Regarding the inspection effect, it can be distinguished and judged by conventional bearings or users who know the reasonable bearings. In addition, the inspection cycle and inspection parameters can be different according to the use of the mechanical function and the importance of related factors. If the above damages cannot meet the requirements for reuse, the pillow block bearings must not be used from the beginning and need to be replaced.