4 Channel UV LED spot curing system

Features: 1. It is easy operation via simple and clear English interface. 2. The standard version offer 4 irradiation channels. Each channel is independent running. If you need more irradiation channels version, it can be customized. 3. Built-in power supply and compact size design. Now it is no longer troublesome for the management and loss of the external power adapter. 4. Widely used in automated production lines. The fully functional control system offers fault feedback, running state feedback and emergency stop. It can be controlled by MCU, PLC and computer via communication ports. 5. The cable of the UV LED light tube is Japanese TAIYO robot flexible cable. The bending resistance is over 10 million times. 6. Both mechanical cooling and fan cooling UV LED light tubes are offered. The fan cooling type is better heat dissipation and widely used for the long time continuously running. 7. The UV LED light tube is built-in temperature sensor. Monitor the temperature and stop running immediately when it is overheated. 8. There is a fool proof key switch. It prevents operators to modify the approved running parameters. 9. The controller housing is aluminum material and no cooling hole. So it won't rust and the internal electronic parts are not easy to be polluted by the dust. 10. The service life of each irradiation channel is independently recorded. It is helpful to find out whether the UV LED light tube need to be replaced with a new one. Controller specification： Part No.：NSC4 Power supply：Built-in the controller box UV power adjustable range：10~100% Auto mode：Irradiation time 0~999.9S Manual mode：On/Off by control signal Irradiation channel：4 channels;Independent running each channel Service life record：Independent record each channel External control port：Foot switch /PLC /MCU/RS232 Fool proof switch：A key switch A/C input：100-240VAC 50/60HZ