honing tool

Honing unit tool The Honing unit tool is a new type of processing tool used to process the inner hole and improve the surface finish of the inner hole. According to the size of the honing hole, it is divided into several series. Each series consists of mandrel, wedge, connector, ejector pin, correcting sleeve, centering sleeve and oil stone. The parts are assembled together and matched with each other and then passed through the machine tool. Drives the completion of honing process to achieve the desired processing performance. The single whetstone honing tool produced by Hung Ning is particularly suitable for small hole processing. The minimum honing hole diameter is 2.54 mm. The straightness is high, and product dimensional tolerance and hardness requirements can be strictly controlled. And special design tools can be tailored to the specific requirements of different customers. Application : Honing machine with automatic feed system , our WH series , Sunnen 1804/1805 ... Parts are open ,0.005mm accurace , Ra 0.1 .... honing stones : Honing stone is an abrasive that is matched with other honing tools then installed on honing machiens to process parts with holes . They are highly efficient , have a high honing precision , a fine finishing and a reliable repairing performance due to the premium abrasive with advanced formula and processing rechnology . The most commonly used abrasive materuals include Diamond , cubic boron nitride , Aluminium Oxide and Silicon Carbide . ALL can be used in our machines and SUNNEN's machines