Beer Fermenter Stainless steel Fermentation Tank

STANDARD PRODUCT CONFIGURATION & SPEC Material: SUS 304 S/S Volume: 1000L effective,1340L total volume, 25% head space, without domed head space Tank working pressure: 2.5bar Jacket working pressure: 1bar Inner tank thickness: 3mm, outer cladding: 2mm Polyurethane insulation, thickness: 100mm, side and bottom insulated Dimple plate cooling jacket Cooling stage: cylinder and cone Since temp control stage Exterior: stain removed, and brightened on regular margin Interior surface: Polished, and welding joint acid cleaned Roughness: 0.4um Domed top, 60 degree cone angle 4 pcs stainless steel leg, with adjustable leg bolt Top fittings: CIP arm, spray ball, PVRV Side fittings: Glycol inlet/outlet, thermo well, sample port, manway (side) Bottom fittings: Drain valve, beer racking arm, with carbonation stone CIP arm including pressure gauge and pressure regulator Mechanical pressure valve mounted with CIP arm Top dry hopping port Material inlet/outlet with DIN, glycol line with TC Fittings quantity: 4* butterfly valves (drain outlet, beer outlet, 2 for CIP arm) 1*sample valve 1* breathe valve on tank top 1*pressure regulation installed with CIP arm 1*CIP arm 1* pressure indicator 1* temp sensor 1* solenoid valves 1* check valve (part of glycol cooling line)