26GHz pulse radar level transmitter for lpg tank gas station liquids

DCRD1000A2 high frequency26GHz radarleveltransmitter 1. Working Principle Radar level antenna emits narrow microwave pulses that transmitted down by the antenna. The microwave comes into contact with the measured medium surface then reflected back and receiving by the antenna system. The signal is transmitted to electronic circuit and partly convert to level signals (as the microwave featured with high propagation speed, it's almost instantaneous for the electromagnetic waves to reach the target and return to the receiver) 2.Features of 26GHz Radar Level Transmitter ·Small antenna size, easy to install; non-contact radar, no wear, no pollution. ·Almost free from corrosion, foam impact; hardly affected by the change of the temperature, pressure and water vapor in the atmosphere. ·Severe dust environment is not likely to affect the work of the high-frequency level transmitter. ·Shorter wavelength can achieve better reflection for the inclined solid surface. ·The small field angle and energy concentration, enhanced echo capabilities, and beneficial to avoid interference. ·Minimized measuring blind spot can gain better result of small tank measurement. ·High SNR, even in the case of fluctuations can result in better performance. ·High frequency, the best choice to measure solids and low dielectric media. 3.Technical Information Application Temperature resistance, withstand pressure, slightly corrosive liquid, sewage, petroleum, river channel, heavy steam conditions, etc. Measuring range 30 meter Process connection Screw, Flange MediumTemperature -40～250°C Process pressure -0.1～4.0MPa Precision ±3mm Frequency range 26GHz Anti-explosion/safety grade ExiaIICT6Ga /IP67 Signal output 4...20mA/HART(Two-wire/Four) RS485/Mod bus