Studio45 - SEO in Ahmedabad
Gujarat, IN
@studio45-seo-in-ahmedabad
Quick actions
SKU 17TSD-1111132
Type Selection Dimension Table of Electric Putter Used in Hopper Matching
Electric Putter
Electrical Equipment Machinery
Price on request
No public price on this one — ask the supplier for a quote.
Details
Rules for the Formulation of Product Types
DT ★ ★ ★ ★ ★
L—low speed
M—Medium speed
H—high speed
Maximum stroke
Rated push-pull force
A—Out-of-band travel adjustable
I—common type
II—bending type
III—coaxial type
electric putter
Note: If you want to use explosion-proof motor, DC motor, brake motor, single-phase motor and other special products, please contact our company.
Electric putter can work reliably under the following conditions:
1. The working environment temperature is between - 10 and 60 C.
2. Relative humidity below 85%.
3. Short-term working system is less than 25%.
4. The overload automatic protection switch should be correctly connected to the electrical control circuit.
5. Users need to install limit switches XW1 and XW2 by themselves (except the electric push rod with adjustable travel).
6. Permissible transverse load: (0.03-0.05)*rated thrust.
7. Start times: less than 4-5 times per minute.
The first condition for choosing electric putter is that its operating temperature must be within its allowable range. If there are special requirements, it needs to be explained in advance. If the travel is more than 800mm, the length of the elastic tube of the electric putter should be added, and when the travel is more than 300 mm, the stability of the electric push rod should also be considered.
In order to ensure that the electric putter only accepts radial force in operation, it is necessary to balance the lateral force of the putter, and to determine whether the electric putter has self-locking function. Generally speaking, the working system of trapezoidal teeth lead screw of electric push rod is 25%. If not, it can be improved appropriately.