Studio45 - SEO in Ahmedabad
Gujarat, IN
@studio45-seo-in-ahmedabad
Quick actions
SKU 17TSD-222224
OR shell and tube coolers
OR shell and tube coolers
Manufacturing & Production Machinery Agents
Price on request
No public price on this one — ask the supplier for a quote.
Details
Key Features
1. The effect of heat transfer and cooling is better. The cooler adopts multi-tube type, with large cooling area and good cooling.
2. Full cooling area. The number of copper pipes used in this cooler is more than three times that of fin-tube type and Roller-tooth type. The cooling area is calculated by the surface area of copper pipes, so the cooling area is adequate.
3. Cooling pipe material is the best heat dissipation. Pure copper tube with heat conductivity above 0.95.
Type and Performance Parameter Table
Model A B C D E F G J K L M N Radiator tube flow
OR-60 450 305 45 89 121 3/4” 3/4” 23 11 115.5 95 7*10 22 60
OR-100 555 403 60 114 134 3/4” 3/4” 23 12.5 145.5 106.5 10*20 26 100
OR-150 575 385 70 140 175 1 1/4” 1” 30 12.5 175 130 13*16 42 150
OR-250 780 585 58 250
OR-350 1180 990 58 350
OR-600 1175 950 110 165 207 2” 1 1/4” 34 12.5 205 161 13*16 58 600
OR-800 1700 1490 58 800
OR-1000 2140 1890 58 1000
Note
Both sides of the oil outlet of the cooling pipe can freely decide the entrance and exit, and the flow direction of the oil itself is unrestricted. The water inlet must enter from the bottom and the water outlet from the top.
Freshwater only. The use of sea water should be specially tailored.
Food and chemicals must not be used.
When the temperature difference between water inlet and oil inlet is above 80 C, it can not be installed.
Maximum pressure: 10 kg on oil side and 7 kg on water side.
The cooling efficiency can be maintained only when the scale is removed once every 4 months or half a year on the water side (inside the heat pipe). Keep the amount of oil equal to that of water when using high viscosity oil.