massage therapy,QiRui massage equipment uses energy -efficient and environmental

Today ,let’s talk about the gear and noise of the massager. Some time ago, a customer bought a massager and said that it used with a big noise. As long as you Leaning up it , it will be like a mechanical collision and very fast. Such problem usually are caused by the slipping sound of most motor worms and gears. So, what’s the reason for that? Generally, the motor is strong and the tooth surface friction is hot and expansion. And without extrusion space into the motor worm direct bite teeth. There are two reasons, one is that the contact surface of worm is smooth, the other is that gear material. Usually, the motor worms are machined by CNC equipment, with high accuracy. However, the gear material has domestic and imported, this also affects the life of use and the noise level of massager. Some clients require manufacturers to rise some space in product cost. While manufacturers can only effort to work on some minor details. Takes the material of gear, the price of one-ton of imported and domestic seems to two or three times, but it is difficult to detect the failure to reach the limit use of in terms of quality. Just like the different flavor characteristics of wine, the glass used is different. You can drink wine with the wrong glass, but the effect will be different. Although the quality and taste of many wine are only slightly different, the price may be differ two or three times. So what glass is chosen according to the nature of the wine to match is the best partner. Using wrong cup just like wearing a suit and wearing a pair of sweatpants underneath. It makes people feel weird and uncomfortable. If the massager use the less row material in the gear, if in 50db environment, it is greatly obvious feel that the worm and gear match noise is relatively large, there will be a sense of movement. QiRui massager is full quality for 6 years, it adopting high-precision and high-hardness synchronous gears, imported dupont POM material accuracy up to five grades, the tooth surface is more wear-resistant, thus not only improvement the service life of the massager, but also effectively reducing the noise. Technical Performance 1) The synchronous gear we adopt is high-precision and high-hardness. The accuracy of the imported DuPont POM reaches the fifth level, which makes its surface more durable. Therefore, the service life of the massager will be increased and the noise can be effectively reduced as well. 2)Less vibration: Although the rotor has been in an equilibrium state through precision machining, we still adopt high-precision dynamic balancing equipment. So the motor’s running vibration is very small. 3)Stable performance: The key parts such as motor rotor and shaft are all manufactured by the advanced CNC machining center, which improves the interchangeability of parts. 4)The high efficiency of magnetic tile and carbon brush makes the performance more stable. The double high material and high-performance magnetic tile and the high-quality carbon brush guarantees the motor can be more wear-resistant and does not have magnetic loss. It also has the advantages that high efficiency, stable performance and considerably-increased service life. 5)Stable transmission and high bearing capacity: The worm teeth continuously meshes with worm gear teeth without the entry and exit processes. That results in the smooth and steady running, avoiding the pulsating noise shock and vibration when you start it. 6)High safety, low noise and low temperature rise. It has the built-in surge protector. The motor rotor uses copper silicon steel sheet processed by high performance insulating paint. Temperature rise under normal load is not more than 60K, which is not easy to overheating(ambient temperature 25℃). This series adopts high precision, low noise Z4 bearings to further reduce noise and loss. 7)Different from the manufacturing processes of other peers, all our products, including accessories, have passed 23 quality inspections and achieved standardized design and production. Each product will undergo 20 minutes of silent detection and 40 minutes of re-test in the running status to be qualified prior to shipment from the factory. 8)The shell of massager adopts imported ABS, which is high-toughness, impact resistant, higher-strength and more environmentally friendly. We never adulterate secondary materials and low-quality materials. The raw materials and manufacturing quality of the products are more reliable and synchronized with the top brands in domestic and overseas. 9)Low noise and high temperature resistance: The motor casing is made of seamless steel pipe and the built-in EMC anti-interference protects operation from electromagnetic influence. Pure copper wire with high temperature resistance is processed by QZ-2/130 H-class insulating paint. Therefore, the product has less noise, high temperature resistance and safer operation.