Weifang sungford industrial Co.-LTD
Shandong, CN
@weifang-sungford-industrial-co-ltd-1666499844262
Quick actions
SKU LNDOO-bridge bearing support 001
bearing support
the basin rubber bearing is a new product
Pillow Block Bearings
Price on request
No public price on this one — ask the supplier for a quote.
Details
The basin rubber bearing is made of an elastic rubber body semi-closed in a steel pelvic cavity, which has the fluid property under the three-direction force state to realize the rotation of the upper structure; at the same time, the PTFE on the intermediate steel plate is used. The low friction coefficient between the plate and the stainless steel plate on the upper seat plate achieves the horizontal displacement of the upper structure, so that the shear stress on the support is no longer borne by the rubber block, but indirectly acts on the steel bottom basin and PTFE. Slip between the plate and the stainless steel plate. From the data obtained from the test, the compressive elastic modulus of the rubber body in the three-direction restraint state is nearly 20 times higher than that of the non-laterally constrained compressive elastic modulus, so the bearing capacity of the bearing is greatly improved, and the solution is solved. Ordinary rubber bearing has the limitation of low bearing capacity, so the basin rubber bearing is a new product that can meet the requirements of large supporting force, large horizontal displacement and large corner.
2, structural characteristics
The basin support consists of upper support plate (including top plate and stainless steel slide), PTFE slide, middle steel plate, brass seal ring, rubber plate, bottom basin and anchor bolt. The one-way movable support has a guide block along the moving direction, and the fixed support does not have a PTFE slide and a stainless steel slide.
3, performance characteristics
a. The sliding surface of the stainless steel plate and the PTFE plate is used as the sliding surface of the bearing, the friction coefficient is low, the bearing capacity is large, the vertical deformation is small, the wear resistance and the corrosion resistance are strong.
b. The support structure is simple, light in weight, and the price is lower than that of the cast steel support, which has obvious economic benefits.
C. The building height is low, which is very beneficial to the structural design of the bridge.
d, easy to use and maintain.