Soda ash Substitute

Brief information -- SCS-280 is a brand new soda substitute by advanced technology of EU and US. -- Amount of SCS-280 is only 1/8-10 of soda ash, and better washing and rubbing fastness than that of soda ash. -- Saves water and energy while SCS-280 requires 2 to 3 times washing and soda ash requires at least 4 times. -- Lower COD that lowers ETP cost and achieves cost saving and environment protection. Main composition -- Alkali compound of organic and inorganic substances. General properties -- Appearance: White powder -- pH: 11.5±1 (1% solution) -- Ionicity: Nonionic -- Solubility: Easily soluble in water -- Stability: Stable to acid, alkali, electrolytes and hard water Properties and fields of application -- An optimized soda ash substitute with excellent buffer performance that can replace soda ash while the amount is only 1/8-10 of soda ash in cellulose fibers and their blends dyeing with reactive dyestuffs. Meanwhile, confers controllable synchronous dyeing and fixing. -- Does not cause white spots due to low quality water with high concentration of calcium and magnesium ions, or residual carbonates from incomplete washing of soda ash. -- Easy dilution and operation with low cost. -- Suitable for all kinds of equipments and various reactive dyestuffs with synchronous dyeing and fixing at different water ratio. Application -- Dilution: weighs exact amount and dilutes 10 times in auxiliary tank before dyeing tank. -- Dosing: does slowly add 1/3 of the amount, and then adds the leaving 2/3 at a time. -- Dosage: 1/8-10 of soda ash, it’s better to add 2g/l soda ash. -- Dipping: calculates at water ration while bath ratio is above 10 and O.W.F while bath ratio is below 10. Packing and storage -- Packing: 25 kg/bag -- Storage: 12 months in sealed packing at room temperature and keeps off moisture.