IEC61215-2:2016 UV preconditioning testing chamber

Purpose:to precondition the module with ultra-violet (UV) radiation before the thermal cycle/humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation Technical specifications: 1、Use material:can completely obstruct ultraviolet rays,tightness,good thermal insulation’s high quality materials 2、Machine UV total irradiation area:more than 2000mm×2000mm,meanwhile satisfy 2 pcs module (2m×1m) 3、Light source life :system use Xenon lamp single lamp life is 1000 hours , delivery offer one set of spare part, use the life at above 2000 hours 4、Single lamp UVA and UVA relative energy rate:UVB approx occupy total energy 3%~10% 5、Irradiation strength:wavelength 280nm~385nm’s irradiation strength can reach about 100W/m²,280nm～320nm ≦10％,promise the test cycle reduce as far as possible 6、Irradiance uniformity:be better than ±15％ 7、Real-time monitor and show UVA and UVB strength 8、UVA (320nm~385nm), UVB(280~320nm) Each one of the fiber optic probes 9、Module surface temperature:60℃±5℃ 10、Temperature resolution:0.1℃ 11、Ozone: almost no ozone is produced 12、Light ways :upper light, module test plane vertical light source 13、Touch screen operate and real-time monitor , when reached the set value will automatic cut off the light source 14、Real-time figure show module surface temperature, measurement accurate±0.1℃