LCP luminaire energy efficiency test

What is the LCP test, LED light Australian LCP test LED lamps exported to Australia to apply for the necessary documents for Australian state subsidies: LCP: Lamp Circuit Power is the combined power consumption of a lamp and its control gear. AC and DC power supply electronic control unit for LED modules - performance requirements DC or AC supplied electronic control gear for LED module – Performance Requirements 1 Scope This standard specifies DC and power supply with a frequency of 50 Hz/60 Hz (the output frequency can be different from the power supply frequency) and an AC power supply of less than 1,000 V. The performance requirements of the electronic control unit complying with the IEC 62031 LED module are required. . The control device for LED modules specified in this standard is designed to supply constant voltage or constant current. This standard is also applicable to the types of non-pure voltage and constant current. Note 1. The tests in this standard are type tests and do not include test requirements for individual control devices during the production process. 2. For control devices with devices that vary the output power, the relevant requirements are still under discussion. 3. Control devices complying with this standard are guaranteed to operate at rated voltages of 92% to 106%, depending on the specifications specified by the manufacturer. 2. Necessary reference materials The following standards should be used in conjunction with this standard. The dated reference standard applies only to this edition. For those who do not date, the new version (including all additions and revisions) is applicable. IEC 61347-2-13, Lamp controlgear – Part 2-13: Particular requirements for d.c. or a.c. Served electronic gear for LED modules IEC 62031, LED modules for general lighting – Safety requirements 3. Interpretation of terms This standard applies to the following definitions of terms. 3.1 total circuit power (total circuit power) The combination of the LED module and the control unit at the rated voltage of the control unit and the high rated output load. . . Test items: I. Input current (constant current power supply) Judging standard: 10% of rated value II. Voltage: (rated voltage) Judging standard: -10% III. Total power, criterion: 10% IV, power factor, error <= -0.05 LCP's IEC 62384:2011 is actually the error range of the factory's claimed rating and the actual test RMS, is within the standard range. LED power Australia energy LCP certification Purpose and significance of the assessment (1) Assess whether the LCP project meets the requirements of national and local laws, regulations, plans, industrial policies, industry access conditions, and related standards and specifications. (2) Evaluate whether the LCP project process and process equipment are advanced and feasible in terms of energy consumption. (3) Explain the situation of building LCP project design energy, scientifically and rigorously evaluate the objective and comprehensive analysis of the advanced points and weak links of the rational use of LCP projects, and determine the policy conformity and science of rational use of LCP projects. Sex.