GE IS215UCVEH2A IN STOCK
http://www.nseauto.com
On request
Enquire
Products & services
120741 from suppliers on NetU
ISO Standard Foot Valve85
ISO standard Foot valves usually come fitted with an inlet strainer. This strainer filters the incoming water, thereby preventing debris in the well water from entering into the pipe and clogging the valve, jamming it in the open position.
On request
Enquire
Safety Relief Valve43
Safety Relief Valve,ASME Safety Relief Valve
On request
Enquire
Ductile Iron GGG40 Air Valve11
The body made of ductile iron GGG40 The bolt is made of stainless steel or carbon steel The ball is made of metal insert fully covered with a rubber layer All the internal and external cast iron surfaces of the valve are covered with powder epoxy paint Connection: Threaded or Flanged ac
On request
Enquire
24 Bar Wet Type Hydrant41
24 Bar Wet Type Hydrant,Wet Type Hydrant
On request
Enquire
Ductile Iron or Cast Iron Pipe Fittings18
Standard: ISO2531, BS EN545, ANSI, AWWAC110, AWWAC153 (Socket, elbow, cross, bend, tee, T-joint, reducing flange, taper, etc) Link type: Flanged, spigot, groove, push on socket, mechanical socket) Working pressure: PN16/PN16 Size: DN50-DN1200 Epoxy coated
On request
Enquire
Ductile Iron GGG50 Gate Valve66
We have specialized in production of valves and fittings for almost 30 years and all our products are made of Ductile Cast Iron GGG50 with epoxy powder coated, like gate valve, butterfly valve, check valve etc. Application Working temperature: -10°c~80°c Working Pressure: PN10, PN16, PN25 Ductile
On request
Enquire
DIN3356/BS5152 Globe Valve30
High quality and precision-tooled DUCTILE IRON/CAST IRON Handwheel, Electric actuator connection:flanged Stainless steel spiral wound gasket Simple structure, manufacture and maintenance is more convenient Low friction force of sealing surface, good sealing performance, and long service life
On request
Enquire
Ductile Iron GGG50 Check Valve20
Entirely automatic in action Depending upon pressure and velocity of flow within the line to perform their functions of opening and closing Swing pattern Ductile iron GGG50 Body,cast iron is also available Working pressure:1.0/1.6 MPa Suitable medium: water, oil and gas
On request
Enquire
Double Disc Wafer Check Valve47
A. The springs have been designed to endure stresses and also ensure operating without failure for many cycles B. Fully Rubber Lined Valve to avoid corrosion Inside are available. C. The two semicircle plate responsiveness of opening and closing is quick and it is strong against corrosion also has
On request
Enquire
Rubber Seated Butterfly Valve90
Body is made of Cast Iron GG25 or Ductile iron GGG40/GGG50 EPDM, NBR, PTFE liner with reinforced seating area Shaft made by SS410, SS420 or SS416 Both inner and out part is Fusion-bonded epoxy 300microns minimum
On request
Enquire
Bronze Safety Valve49
Bronze Safety Valve,ASME Safety Relief Valve
On request
Enquire
Double Eccentric Butterfly Valve80
Full set of molds for all GGG40 double eccentric butterfly valves have been developed with sizes ranging from DN100 to DN3600, pressure up to PN25. If requested, bi-directional double eccentric butterfly valve can also be supplied. The surface treatment will be epoxy coating to 300 microns min. w
On request
Enquire
Double Shafts Lug Butterfly Valve23
Double shafts Lug butterfly valves have threaded inserts at both sides of the valve body. This allows them to be installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate set of bolts for each flange. This setup permits either side of
On request
Enquire
Ductile Iron Ball Valve86
Body made of ductile iron EN-GJS 400-15 Epoxy coating according to EN 14091 Seat material made of PTFE, F46, EFP Ductile Iron Ball Valve has advantages as following: 1. Quick to open and close 2. Available in multi-port designs 3. Suitable for both clean and silty flow 4. They provide bubbl
On request
Enquire
Ductile Iron Y Type Strainer1
Ductile iron Y Type Strainer is an essential device for pipeline system. It is usually fixed on the inlet of reducing valve, relief valve and lever control valve to clear away the impurity in the media, ensuring normal use. Any questions will be replied within 24 hours, you can contact us at any ti
On request
Enquire
Full Lift Safety Relief Valve80
Full Lift Safety Relief Valve,Safety Valve
On request
Enquire
ISO Standard Foot Valve85
ISO standard Foot valves usually come fitted with an inlet strainer. This strainer filters the incoming water, thereby preventing debris in the well water from entering into the pipe and clogging the valve, jamming it in the open position.
On request
Enquire
Ductile Iron GGG40 Air Valve97
The body made of ductile iron GGG40 The bolt is made of stainless steel or carbon steel The ball is made of metal insert fully covered with a rubber layer All the internal and external cast iron surfaces of the valve are covered with powder epoxy paint Connection: Threaded or Flanged ac
On request
Enquire
Ductile Iron or Cast Iron Pipe Fittings73
Standard: ISO2531, BS EN545, ANSI, AWWAC110, AWWAC153 (Socket, elbow, cross, bend, tee, T-joint, reducing flange, taper, etc) Link type: Flanged, spigot, groove, push on socket, mechanical socket) Working pressure: PN16/PN16 Size: DN50-DN1200 Epoxy coated
On request
Enquire